◆ Energy saving : The aluminum alloy three-in-one heat exchange design minimizes the process loss of cooling capacity and improves the recycling of cooling capacity. Under the same processing capacity, the total input power of this model is reduced by 15~50%.

◆ Efficient : The integrated heat exchange is equipped with a flow guide piece to make the compressed air exchange more heat inside. The built-in air-water separation device is equipped with a stainless steel filter to separate the water more thoroughly.

◆ Intelligence : Multi-channel temperature and pressure monitoring, real-time display of dew point temperature, automatic recording of accumulated running time. It has self-diagnosis function, displays corresponding alarm codes, and automatically protects equipment.

◆ Environmental protection : In response to the International Montreal Protocol, this series of models all use R134a and R410a environmentally friendly refrigerants, which have zero damage to the atmosphere and meet the needs of the international market.

◆ Stability : Standard configuration of constant pressure expansion valve, standard configuration of intelligent temperature control, laboratory test when the inlet temperature reaches 65℃ and the ambient temperature reaches 42℃, it still operates stably, and it also has dual antifreeze protection of temperature and pressure. While saving energy, prolong the service life of equipment.

Attention to use of TR series cold dryer:

Ambient temperature: 38°C, maximum 42°C

Compressed air inlet temperature: 38°C, max 65°C

Compressed air pressure: 0.7MPa, up to 1.6MPa

Pressure dew point under working conditions: 2°C ~10°C (atmospheric dew point: -23°C ~-17°C)

Installation environment: no sunlight, no rain, good ventilation, installed on a horizontal hard foundation, no obvious dust and flying catkins